FREQUENTLY ASKED QUESTIONS AND INSTALLATION GUIDE

- HotFireDoor -

FAQ

No. The vitroceramic glass is heat resistant. It withstands up to 900°C, but it can be damaged if subjected to impacts or physical forces.

Yes. Heat is radiated through it.

No. Cleaning of the glass on fireplace doors is necessary to maintain their appearance and functionality.

There are commercial products specifically designed to clean glass for fireplace doors. You can easily find them in supermarkets.

The door opens approximately 110º

Yes. All our doors incorporate an adjustable air intake to control the intensity of the fire and the amount of oxygen supplied.

No. Quite the opposite. Closed wood fireplaces offer a performance between 60 and 80%, while open ones present a performance of 15%.

Heat is transmitted through the vitroceramic glass and radiated into the room where the fireplace is installed.

No. The assembly kit is included with the purchase of the door.

The warranty is for 2 years for manufacturing defects, but it does not cover damages caused by improper use, negligence, or normal wear.

When we light the fireplace, the conduit is full of cold air that acts as a plug to the smoke generated by the fire. If we close the door right after lighting the fireplace, we can cause the entire cavity to fill with smoke, which may escape through some of the joints. Therefore, it is advisable to leave the door open until the convection current generated by the fire has evacuated this plug of cold air.

If we close the door right after lighting the fireplace, we can cause the entire cavity to fill with smoke, which may escape through some of the joints.

The burner is an accessory independent of the door. It keeps the embers alive and more aired. The ash falls into the drawer, making the cleaning of the fireplace an easier task.

Before lighting the fire, make sure that the draft hatch is fully open. This allows for an adequate flow of air and aids in the efficient combustion of the fire.

Yes, it is advisable to clean the chimney before placing a door and then once a year. During the use of the fireplace, residues such as soot, creosote and other deposits accumulate in the exhaust duct. These residues can be flammable and pose a fire risk if not removed.

In general, it is estimated that placing a door on the fireplace can generate fuel savings of around 20% to 30%.

The closed door provides a physical barrier that helps to prevent smoke from escaping directly into the room, which can considerably reduce the amount of smoke smell that is perceived.

The stainless steel swinging grill is an optional accessory, by anchoring its lateral support from the inside of the fireplace, you can put and remove the grill whenever you want and enjoy a dual use of your embers.

Yes. The door leaf is easily disassembled due to its pivoting system.

Yes. You can find them in our online store.

We only provide this service in the province of Barcelona, but the assembly is very simple and does not require any specialist to carry it out.

Yes. The measurements should be as exact as possible, as we take care of giving them the necessary margin.

Yes. Our company is located in the province of Barcelona. You can visit during business hours.

Step by Step Installation

Included materials we send you

  • Transparent vitro-ceramic plate able to withstand temperatures of up to 900ºC
  • Doorframe
  • Ash pan and burner (optional depending on the model chosen)
  • Fireproof putty for joins, able to withstand temperatures of up to 1,500ºC
  • Metal anchor points

Required gear to mount

  • Drill
  • Ø 8mm drill
  • bit 10mm spanner or adjustable
  • wrench Silicone applicator gun
  • Patience

SEPARATE THE DOOR FROM THE FRAME

Paso 1 - para instalar una puerta de chimenea

PLACE THE FRAME IN THE HOME UNTIL IT LOOKS COUPLE

Paso 2 - para instalar una puerta de chimenea

MARK WITH POINT THE POINTS WHERE THE FRAME WILL BE FIXED

Paso 3 - para instalar una puerta de chimenea

USE A DRILL AND Ø 10 MM DRILL BIT TO MAKE THE HOLES

Paso 4 - para instalar una puerta de chimenea

TIGHTEN THE SCREWS WITH A 13 MM OR ENGLISH WRENCH

Paso 5 - para instalar una puerta de chimenea

TIGHTEN THE SCREWS WITH A 13 MM OR ENGLISH WRENCH

Paso 6 - para instalar una puerta de chimenea

FRONT COUPLING, FIRST IT WAS UP AND THEN IT IS FITTED BELOW. WHEN YOU HAVE FINISHED, THE DOOR WILL ALREADY BE INSTALLED.

Paso 7 -